Firmware ID-51A PLUS, ID-51E PLUS, ID-51A Icom 50th Anniversary Limited Edition, ID-51E Icom 50th
Gönderilme zamanı: 04 Mar 2026, 22:30
Firmware ID-51A PLUS, ID-51E PLUS, ID-51A Icom 50th Anniversary Limited Edition, ID-51E Icom 50th Anniversary Limited Edition
Version Release E5
Update 2020/01/31
Major changes
Changes from Release E4
Fixed the problem where the standby beep may sound approximately two seconds after receiving a reply when simply pushing PTT to key up the repeater. This occurred on transceivers using Release E3 or Release E4 firmware.
To update the firmware
Thoroughly read "Firmware update instructions" and follow the instructions in it.
An OPC-2350LU or OPC-2218LU is required to install the firmware update. To use the OPC-2218LU for the first time, a USB driver is required. Download the driver here.
Making a backup file of programmed contents and settings before updating the firmware is recommended.
The DSP firmware will be updated to 1.05.
Buradan indirin https://www.icomjapan.com/support/firmware_driver/2585/
Version Release E5
Update 2020/01/31
Major changes
Changes from Release E4
Fixed the problem where the standby beep may sound approximately two seconds after receiving a reply when simply pushing PTT to key up the repeater. This occurred on transceivers using Release E3 or Release E4 firmware.
To update the firmware
Thoroughly read "Firmware update instructions" and follow the instructions in it.
An OPC-2350LU or OPC-2218LU is required to install the firmware update. To use the OPC-2218LU for the first time, a USB driver is required. Download the driver here.
Making a backup file of programmed contents and settings before updating the firmware is recommended.
The DSP firmware will be updated to 1.05.
Buradan indirin https://www.icomjapan.com/support/firmware_driver/2585/