ICOM ID-31A PLUS, ID-31E PLUS Firmware
Gönderilme zamanı: 04 Mar 2026, 23:09
ICOM ID-31A PLUS, ID-31E PLUS Firmware
ICOM ID-31A PLUS, ID-31E PLUS.zip
Model name ID-31A PLUS, ID-31E PLUS
Version Release E4
Update 2020/01/31
Major changes
Changes from Release E3
Fixed the problem where the standby beep may sound approximately two seconds after receiving a reply when simply pushing PTT to key up the repeater. This occurred on transceivers using Release E2 or Release E3 firmware.
To update the firmware
Thoroughly read "Firmware update instructions" and follow the instructions in it.
An OPC-2350LU or OPC-2218LU is required to install the firmware update. To use the OPC-2218LU for the first time, a USB driver is required. Download the driver here.
Making a backup file of programmed contents and settings before updating the firmware is recommended.
The DSP firmware will be updated to 1.04.
ICOM ID-31A PLUS, ID-31E PLUS.zip
Model name ID-31A PLUS, ID-31E PLUS
Version Release E4
Update 2020/01/31
Major changes
Changes from Release E3
Fixed the problem where the standby beep may sound approximately two seconds after receiving a reply when simply pushing PTT to key up the repeater. This occurred on transceivers using Release E2 or Release E3 firmware.
To update the firmware
Thoroughly read "Firmware update instructions" and follow the instructions in it.
An OPC-2350LU or OPC-2218LU is required to install the firmware update. To use the OPC-2218LU for the first time, a USB driver is required. Download the driver here.
Making a backup file of programmed contents and settings before updating the firmware is recommended.
The DSP firmware will be updated to 1.04.