ICOM IC-7800 Firmware Version.3.10
Gönderilme zamanı: 04 May 2026, 12:16
ICOM IC-7800 Firmware Version.3.10
ICOM IC-7800 Firmware Version.3.10.zip
Firmware
Model name IC-7800
Version Version.3.10
Update 2015/05/21
Major changes
Improvements
CI-V commands for antenna control and logging software have been added.
"MOS-FET" is now the default value of “SEND Relay Type.”
Refer to IC-7800 Information for Firmware version 3.10 for details.
Thoroughly read Section 16 (UPDATING THE FIRMWARE) of the instruction manual (here) for details of what the update requires.
Backup your transceiver’s data onto a CF card as it is possible that your data could get lost or corrupted during the update.
Never turn OFF the transceiver power during the update.
The firmware update utility is necessary when updating the firmware through a LAN. Download the utility here.
This firmware updates to the latest firmware version. If you update from an earlier version, review all previous update information as well for additional feature details. Download the information here.
ICOM IC-7800 Firmware Version.3.10.zip
Firmware
Model name IC-7800
Version Version.3.10
Update 2015/05/21
Major changes
Improvements
CI-V commands for antenna control and logging software have been added.
"MOS-FET" is now the default value of “SEND Relay Type.”
Refer to IC-7800 Information for Firmware version 3.10 for details.
Thoroughly read Section 16 (UPDATING THE FIRMWARE) of the instruction manual (here) for details of what the update requires.
Backup your transceiver’s data onto a CF card as it is possible that your data could get lost or corrupted during the update.
Never turn OFF the transceiver power during the update.
The firmware update utility is necessary when updating the firmware through a LAN. Download the utility here.
This firmware updates to the latest firmware version. If you update from an earlier version, review all previous update information as well for additional feature details. Download the information here.