RS-BA1 Version 2 Control software Version 2.81
Gönderilme zamanı: 29 Haz 2026, 13:14
RS-BA1 Version 2 Control software Version 2.81
RS-BA1 Version 2 Control software Version 2.81.zip
RS-BA1 Version 2
Version Version 2.81
Update 2026/06/16
Major changes
Changes from Version 2.80
- Fixed a bug in Windows 11 where the virtual driver installation would fail under certain conditions
Note
To update the firmware
• Execute the Update.exe extracted from the downloaded file on the PC that has an older RS-BA1 Version 2 installed. Then follow the instructions displayed on the screen.
Notes
• This update cannot be applied to the RS-BA1 (Version 1.**).
• The revised manual is also downloadable from the link below.
• The USB 3.0 driver for your transceiver can be downloaded on its Support/Download page.
• The firmware for the RC-28 is downloadable here.
• Merge (double-click) the 'Recover_Setup_Rsba1_Control.reg' and 'Recover_Setup_Utility.reg' extracted registry files ONLY when you need to initialize the settings of the RS-BA1.
• The software will be updated to the following versions.
Remote control: Version 2.81
Remote utility: Version 2.26
RS-BA1 Version 2 Control software Version 2.81.zip
RS-BA1 Version 2
Version Version 2.81
Update 2026/06/16
Major changes
Changes from Version 2.80
- Fixed a bug in Windows 11 where the virtual driver installation would fail under certain conditions
Note
To update the firmware
• Execute the Update.exe extracted from the downloaded file on the PC that has an older RS-BA1 Version 2 installed. Then follow the instructions displayed on the screen.
Notes
• This update cannot be applied to the RS-BA1 (Version 1.**).
• The revised manual is also downloadable from the link below.
• The USB 3.0 driver for your transceiver can be downloaded on its Support/Download page.
• The firmware for the RC-28 is downloadable here.
• Merge (double-click) the 'Recover_Setup_Rsba1_Control.reg' and 'Recover_Setup_Utility.reg' extracted registry files ONLY when you need to initialize the settings of the RS-BA1.
• The software will be updated to the following versions.
Remote control: Version 2.81
Remote utility: Version 2.26