RigOne
Gönderilme zamanı: 23 Eyl 2026, 11:07
RigOne
RigOne v1.2.8 https://github.com/reflectingme/RigOne-Downloads
https://gw3jvb.uk/software/rigone/
RigOne v1.2.8 adds initial native Yaesu FT-DX10 support and continues the scope, waterfall, clock, and operating-panel refinements from the 1.2.x series.
Copyright © 2026 John Burns GW3JVB. All rights reserved. RigOne is proprietary software.
Changes
Added initial Native Yaesu FT-DX10 control, including frequency, mode, band, transmit, mute, tuner, VOX, RF gain, AF gain, S-meter, and related operating controls.
Added FT-DX10 radio scope controls for the radio's own scope display: level, peak, span, speed, mode, hold, marker, and colour.
Added a right-click FT-DX10 scope level slider from -30 dB to +30 dB.
Hid the native Icom CI-V address field when Native Yaesu control is selected, reducing settings confusion for Yaesu users.
Improved native Icom baud-rate defaults so returning to native Icom control restores the expected 115200 baud setting.
Added a two-clock station clock with local time and an adjustable DX clock.
Added native Icom radio clock sync from RigOne, with timeout handling so live polling recovers cleanly if the radio does not respond.
Added RF power setting from the meter area, using a compact right-click vertical slider.
Added Raw, Normalized, and RigOne scope display modes for comparing the received radio scope bins with RigOne's enhanced display path.
Added a draggable trace/waterfall divider so the live trace and waterfall history can be resized within the scope view.
Improved Icom scope/waterfall polling balance so the S-meter remains responsive while live scope data is active.
Improved clock layout and sizing across Wide and 16:9 panel layouts, including the 1024 x 576 preset.
Improved 1024 x 576 and disconnected-start layout behaviour for the Active VFO radio/mode/band controls.
Improved FM/11-metre passband display behaviour so fixed FM passband presentation is clearer.
Improved 11-metre mode handling so AM/FM/LSB/USB are preserved where appropriate, with USA/Canada defaulting to AM and other regions defaulting to FM when a mode change is needed.
Notes
Native Yaesu FT-DX10 control uses CAT for radio control, but the FT-DX10 does not provide RigOne live panadapter/waterfall frames over this CAT path. RigOne therefore controls the radio's own scope settings instead.
Native Icom remains the complete RigOne live scope/panadapter/waterfall path where the selected Icom radio provides those frames.
Hamlib support remains included through the bundled Windows Hamlib runtime.
Radio clock sync is currently available for native Icom control.
RigOne v1.2.8 https://github.com/reflectingme/RigOne-Downloads
https://gw3jvb.uk/software/rigone/
RigOne v1.2.8 adds initial native Yaesu FT-DX10 support and continues the scope, waterfall, clock, and operating-panel refinements from the 1.2.x series.
Copyright © 2026 John Burns GW3JVB. All rights reserved. RigOne is proprietary software.
Changes
Added initial Native Yaesu FT-DX10 control, including frequency, mode, band, transmit, mute, tuner, VOX, RF gain, AF gain, S-meter, and related operating controls.
Added FT-DX10 radio scope controls for the radio's own scope display: level, peak, span, speed, mode, hold, marker, and colour.
Added a right-click FT-DX10 scope level slider from -30 dB to +30 dB.
Hid the native Icom CI-V address field when Native Yaesu control is selected, reducing settings confusion for Yaesu users.
Improved native Icom baud-rate defaults so returning to native Icom control restores the expected 115200 baud setting.
Added a two-clock station clock with local time and an adjustable DX clock.
Added native Icom radio clock sync from RigOne, with timeout handling so live polling recovers cleanly if the radio does not respond.
Added RF power setting from the meter area, using a compact right-click vertical slider.
Added Raw, Normalized, and RigOne scope display modes for comparing the received radio scope bins with RigOne's enhanced display path.
Added a draggable trace/waterfall divider so the live trace and waterfall history can be resized within the scope view.
Improved Icom scope/waterfall polling balance so the S-meter remains responsive while live scope data is active.
Improved clock layout and sizing across Wide and 16:9 panel layouts, including the 1024 x 576 preset.
Improved 1024 x 576 and disconnected-start layout behaviour for the Active VFO radio/mode/band controls.
Improved FM/11-metre passband display behaviour so fixed FM passband presentation is clearer.
Improved 11-metre mode handling so AM/FM/LSB/USB are preserved where appropriate, with USA/Canada defaulting to AM and other regions defaulting to FM when a mode change is needed.
Notes
Native Yaesu FT-DX10 control uses CAT for radio control, but the FT-DX10 does not provide RigOne live panadapter/waterfall frames over this CAT path. RigOne therefore controls the radio's own scope settings instead.
Native Icom remains the complete RigOne live scope/panadapter/waterfall path where the selected Icom radio provides those frames.
Hamlib support remains included through the bundled Windows Hamlib runtime.
Radio clock sync is currently available for native Icom control.