ICOM IC-7851 & IC-7850 Firmware Download Version 1.41.rar
Download Type Firmware
Model name IC-7850/IC-7851
Version Version 1.41
Update 2024/05/15
Major changes
Changes from Version 1.40
[Added linkage function with IC-PW2]
・Supported for the Linked manual tuning with IC-PW2.
・Supported for the IC-PW2 Dual Connection Mode.
・Supported for the IC-PW2 Transmission Interlock control.
[Any other changes]
・Improved the All Reset operation.
When the [POWER] key cannot turn ON or OFF the transceiver, holding down the [F-IMP] and [MW] keys and turning ON with the [I/O] key on the Rear panel instead of the [POWER] key will perform an All Reset.
For details, please refer to "Information IC-7850/IC-7851 Version 1.41."
Note
The software update for the compatible RS-BA1 can be downloaded here.
To update the firmware
Thoroughly read Section 10. USING AN SD CARD OR USB FLASH DRIVE and Section 17. UPDATING THE FIRMWARE of the INSTRUCTION MANUAL and follow the instructions displayed on the transceiver's LCD screen.
BE SURE to make a backup copy of your data settings to an SD card/USB flash drive before updating the firmware.
