ICOM IC-R1500, IC-PCR1500, IC-R2500, IC-PCR2500 Firmware

[TA2KW]

ICOM IC-R1500, IC-PCR1500, IC-R2500, IC-PCR2500 Firmware Ver.2.10

ICOM IC-R1500, IC-PCR1500, IC-R2500, IC-PCR2500 Firmware Ver.2.10.zip



Firmware
Model name IC-R1500, IC-PCR1500, IC-R2500, IC-PCR2500
Version Ver.2.10
Update 2013/10/01
Major changes
Read this information carefully before clicking the "Agree" button below to download the firmware.

Improvement

P25 frequency coverage is extended.
The AFC function is improved.
Note

Read "Software & Firmware update information" thoroughly and make sure what is required.
Before installing this firmware, you must first delete the previous USB driver on your PC, and then install the latest USB driver. The USB driver is included in the receiver control software.
Version 2.10 firmware must be used with version 2.201 of the receiver control software. Download the control software version here.
Save the receiver's setting and memory data BEFORE starting the update. In addition, never turn off the receiver power or disconnect the USB cable during the update.
Procedure

You need to update your receiver's firmware to version 2.10, do the following steps.

Backup your data.
Delete the previous USB driver.
Download and install the USB driver and then version 2.201 of the control software.
Download and install version 2.10 of the receiver firmware.